- The centrifugal separator of a fully-automatic type can be continuously driven and the collection of the sludge is easy. Scrapa is driven by the gear motor through the bevel gear. Moreover, the cleaning operation with person's hand is reproduced with the sequence control. The sludge is surely lacked and dropped repeating the normal rotation and the reversal while improving the rotation corner of the scraper in the step. It became easy to succeed in postponing the longevity of the device because of not breaking of the scraper shaft by the difference of the structure of an automatic unit compared with a past fully-automatic centrifugal separator series easily, and the structure to fix the rotation body unnecessary and the suppression of the total height to low, and to be adopted more.
- Pressure in in the spindle case is improved by jetting Oilmist in the spindle (part that tells the turn, and supports it), the bearing is protected by Oilmist at the same time as excluding the foreign body from the outside, and the load is reduced. Please specify it by all means.
The photograph shows the CLG-100 without base
Processing flow rate
Y axis Unit; liters/min
Experient conditions: Water-based slurry with particles that have specific gravity of 4
- The above-mentioned graph is displayed based on the proof experiment data. The value of the graph changes depending on a clay of the water quality and corpuscle specific gravity. This graph doesn't guarantee the filtration accuracy. Please give to me as a standard of operation and the model selection.
- According to to request the filtration accuracy of which extent, it is necessary to decide the processing flowing quantity as shown in the above-mentioned graph. To squeeze flowing quantity when a precise filtration is requested, and to remove impurities rough, flowing quantity can be raised.